表面活性劑1631溴型

點擊看大圖

如果您對該產品感興趣的話,可以

產品名稱: 表面活性劑1631溴型

產品型號: 十六烷基三甲基溴化銨

產品展商: 雪捷

產品文檔: 無相關文檔

簡單介紹

表面活性劑1631溴型，化學名稱：十六烷基三甲基溴化銨，英文名稱：Cetyl trimethyl ammonium bromide，1631溴型用作玻璃纖維拉絲用浸潤劑主要原料，滌綸真絲化促進劑，假發的柔順調理劑，瀝青乳化劑、硬表面清洗劑及有機合成相轉移催化劑等。

表面活性劑1631溴型 的詳細介紹

表面活性劑1631溴型，化學名稱：十六烷基三甲基溴化銨，別名：溴化十六烷基三甲基銨,三甲基十六烷基溴化銨,CTAB
類別：陽離子表面活性劑，CAS號 57-09-0 EINECS 登錄號 200-311-3 分子量：386.90
質量指標:
外觀白色或淡黃色固狀物
活性物含量：70±2%
游離胺含量≤2.0%
pH值（10%水溶液） 6.0～8.0
性能與用途：本品為白色或淡黃色固狀物，溶于乙醇和熱水，與陽離子、非離子、兩性表面活性劑有良好的配伍性，忌與陰離子表面活性劑同浴使用。不宜在120℃以上長時間加熱。表面活性劑1631溴型為瀝青和橡膠的乳化劑；各種纖維的抗靜電劑、柔軟劑；滌綸真絲化助劑；皮革加脂劑；護發素的柔順調理劑；相轉移催化劑；蠶室蠶具消毒劑；乳液起泡劑，還用于助焊劑、焊錫膏生產里起表面活性劑作用，活性強，對亮點、虛焊、焊電飽滿都有一定作用。
包裝貯存：凈含量50公斤/塑桶。應密封貯存在室內，在運輸和貯藏過程中，應小心輕放、防撞、防凍、以免損漏。
儲存（建議）

為了在使用前保證質量，建議把產品置于原包裝中，密封貯存在室內，避免與強氧化劑和陰離子表面活性劑接觸，小心輕放、防撞、防凍以免損漏。

http://www.usephp.cn/threestyle/jsjw1631-1831/firstcatalog/4012292/1.html

Surfactant 1631 bromine type, chemical name: hexadecyltrimethylammonium bromide, alias: hexadecyltrimethylammonium bromide, trimethylhexadecylammonium bromide, cetyltrimethylammonium bromide, CTAB

Category: Cationic surfactant, CAS number 57-09-0 EINECS registration number 200-311-3 Molecular weight: 386.90
Quality indicators:
Appearance white or light yellow solid substance
Active substance content: 70 ± 2%
Free amine content ≤ 2.0%
PH value (10% aqueous solution) 6.0-8.0
Performance and Application: This product is a white or light yellow solid, soluble in ethanol and hot water, and has good compatibility with cationic, non-ionic, and zwitterionic surfactants. It should not be used in the same bath with anionic surfactants. It is not advisable to heat for a long time above 120 ℃. Surfactant 1631 bromine type is an emulsifier for asphalt and rubber; Antistatic agents and softeners for various fibers; Polyester silk chemical additive; Leather fatliquoring agent; A gentle conditioner for hair conditioners; Phase transfer catalyst; Disinfectant for silkworm tools in the silkworm room; Lotion foaming agent is also used as a surface active agent in the production of flux and solder paste. It has strong activity and has a certain effect on bright spots, weak soldering and full soldering.
Packaging and storage: net content of 50 kilograms per plastic drum. It should be sealed and stored indoors. During transportation and storage, it should be handled with care, anti-collision, and antifreeze to prevent damage and leakage.
Storage (recommended)
To ensure quality before use, it is recommended to store the product in its original packaging, sealed indoors, and avoid contact with strong oxidants and anionic surfactants. Handle with care, avoid collisions, and prevent freezing to prevent damage and leakage.
http://www.usephp.cn/threestyle/jsjw1631-1831/firstcatalog/4012292/1.html